:max_bytes(150000):strip_icc()/how-to-select-the-correct-needle-size-for-an-injection-2616536-FINAL-f42600395a324d71b8b3fc4f13f5723d.png)
★★★★★ 5
Fit my 2014 Odyssey TE
Size: 8.8" x 9.3" x 1.1"
Comes with printed instructions for those who haven't changed it before. Here is the specific use case from my van.
On my 2014 TE its easy to access behind the glove box, open to usual full open then just push the left and right sides in to allow the glove box to come fully out. It may pop off of the mounts, don't panic it snaps right back on. Then look for the little rectangular panel with two small levers on either side. on the black plastic under the dash that you can now see and access. Press the levers and pull towards you, doing a bit of a wiggle to get it out. Its tight, but it will come out with having to break it. Don't gorilla hands it, it will break.
There is a directional arrow on the filter, which you have to remove from the wrapper before installing. Yes, someone *will* forget that. Reassembly the reverse of removal. Check that video sharing site online if you need visual instructions.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2024
